碳化钨负载的S2O8^2—／ZrO2催化剂的表征与催化活性研究

研究了负载碳化钨对S2O8^2-／ZrO2(PSZ)固体超强酸催化剂(WC／PSZ)上正戊烷异构化反应性能的影响，并用BET、XRD和XPS等手段对催化剂进行了表征．结果表明，PSZ在负载适量碳化钨后对正戊烷反应的活性和选择性显著提高，显示出优于Pt／PSZ等催化剂的效果，并且负载高比表面积的WC具有更高的催化活性．WC在高温焙烧后绝大部分被氧化为WO3，经H2活化后又被还原为W25O73为主的氧化钨，并且可能会形成一种氧化碳化物(WCxOy)产物．     

High Speed Cutting Inconel 718 with Coated Carbide and Ceramic Inserts

High speed machining (HSM) technology is one of important aspects of advanced manufacturing technology. Nickel-based superalloys have been widely used in the aircraft and nuclear industry due to their exceptional thermal resistance and the ability to retain mechanical properties at elevated temperatures of service environment over 700 ℃. However, they are classified as difficult-to-cut materials due to their high shear strength, work hardening tendency, highly abrasive carbide particles in the microstructur...     

Application of Reaction-Bonded Silicon Carbide in Manufacturing of Spacecraft Combustion Chamber

Silicon carbide (SiC) ceramics is a good structural ceramics material, which have a lot of excellent properties such as superior high-temperature strength up to a temperature of 1 350 ℃, chemical stability, good resistance to thermal shock and high abrasion resistance. The silicon carbide ceramics material has so far been used widely for manufacturing various components such as heat exchangers, rolls, rockets combustion chamber. Sintering of ceramics structural parts have many technological method, the reac...     

Samples Selection for Artificial Neural Network Training in Preliminary Structural Design

An artificial neural network (ANN) is applied in the preliminary structural design of reticulated shells. Major efforts are made to enhance the generalization ability of networks through well-selected training samples. Number-theoretic methods (NTMs) are adopted to generate samples with low discrepancy, i.e.uniformly scattered in the domain, where discrepancy is a quantitative measurement of the uniformity. The discrepancy of the NTM-based sample set is 1/6-1/7 that of samples with equal spacing. In a case study,networks trained by NTM-based samples are compared with those trained by equal-spaced samples in generalizing performance. The results show that both the computational precision and stability of the former ANNs are more satisfactory than those of the latter. It is concluded that the flexibility of ANNs in generalizing can be effectively increased by use of uniformly distributed training samples rather than simply piling data.More reliable uniformity should be obtained, however, through NTMs instead of equal-spaced samples.     

C对Fe—20%Cr合金抗氧化性的影响

本文对不同含碳量的 Fe-20%Cr 合金进行了900℃静止大气气氛下的抗氧化实验,并测定了在此温度下的氧化动力学曲线.通过结合氧化膜表面微观形貌对氧化动力学曲线的分析,以及氧化膜下表层的微观分析等,指出随含碳量增加,氧化过程由良性的外部氧化转向恶性的内部氧化的过程及原因,并分析了合金中存在的两种主要类型的碳化物对氧化过程的影响.为高温磨损工况下材料的选择提供了一定的理论依椐.     

新型网壳节点的弹塑性分析及试验研究

简要介绍了一种广泛应用于各类意志支,双层网壳结构的新型承插式节点,在弹塑性理论分析的基础上,进行了一组单向拉,压试验研究,为今后在实际工程中推广这种新型节点提供了可靠依据。     

WC—Co硬质合金刀片热丝法金刚石薄膜涂层附着力

用热丝法研究了ＷＣ－６％Ｃｏ硬质合金刀片金刚石薄膜涂层附着力。结果表明：采用温度为８０℃,（ＨＣｌ：ＨＮＯ３：Ｈ２Ｏ）（体积比）为１∶１∶１溶液对硬质合金刀片表面去Ｃｏ１５ｍｉｎ后,经４０ｕｍ金刚石粉及１．５ｕｍ金刚石加２０ｕｍＴａＣ混合粉进行超声预处理,结果表明,沉积的金刚石薄膜与硬质合金刀片基底具有良好的附着力,而经４０ｕｍ金刚石粉处理的薄膜涂层组织与附着力要好一些。     

多晶3C-SiC薄层的淀积生长及结构性能分析

采用ＨＦＣＶＤ生长法,以较低生长温度,在Ｓｉ（１１１）衬底上淀积３Ｃ－ＳｉＣ（１１１）薄层。用ＸＲＤ、ＶＡＳＥ、ＸＰＳ等分析手段研究了薄层的结构、光学常数、组分及化学键等性能。ＸＲＤ显示薄层具有明显的择优取向特征。ＶＡＳＥ测量出薄层的折射率为２．６８６,光学常数随深度的变化曲线反映出薄层的多层结构。ＸＰＳ深度剖面曲线表明薄层中Ｓｉ／Ｃ原子比符合ＳｉＣ的理想化学计量比,其能谱证明Ｃ１ｓ与Ｓｉ２ｐ成键形成具有闪锌矿结构的３Ｃ－ＳｉＣ。     

中小型印染厂废水处理方法研究

介绍了利用自制的混凝剂与电石渣联用处理印染废水的一种新方法,该方法工艺流程简单,投资少,运行费用低,易于操作,ＣＯＤｃｒ去除率高,为中小型印染厂废水治理开辟了一条新的途径。